[Gmsh] Some post processing questions

Umut Tabak u.tabak at tudelft.nl
Fri Jan 16 12:28:33 CET 2009


Dear all,

I have the attached post-processing file formed as described in Chapter 
9 of the manual. I can plot the deflection shapes of my modes perfectly 
with some user input from the gui which I could not automate yet. That 
said, I should set the from options pane by selecting the view(or 
forcing for all views next changes under post-pro) and then under Offset 
I should set the Normal raise to sth different then 0. Is there a way to 
make this selections automatically in a script file?

My second question is on the taking print outs from the software by a 
simple automated script. But I could not understand the general 
principle, I also attached the small and easy script for a further 
check. (Hopefully, you will understand what I am trying to do from the 
script)However, mesh file is not parsed properly, because I understood 
that, after reading tutorial 8, there should first be a geometry 
definition followed by some result(pos files which I am still struggling 
to understand the structure of pos files there). And then some script 
like operations to print and do some other operations.

I think I had important conceptual misunderstandings in file inclusions 
and general post-processing idea.

I would be quite glad if someone can shed light on the above mentioned 
points for post-processing operations.

Best regards,
Umut
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: printScript.geo
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20090116/73ca44da/attachment.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: postLagrangeApp.msh
Type: model/mesh
Size: 102229 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20090116/73ca44da/attachment.msh>