[Gmsh] Cannot mesh the extrusion of a closed spline

Mengda Wu phdggg at gmail.com
Tue Jul 14 10:19:35 CEST 2009


Hi all,

   I am trying to mesh the extrusion of a closed spline (attached). Only the
mesh of the lateral surface is needed, i.e. without the caps.
But gmsh crashes right away I hit the mesh button. Similar crash occurs with
a closed bspline.

  BTW, the meshing is successful if the closed line is composed of a spline
and a line or two splines. Can you help me on this issue?
I tested this using the stable version 2.3.1 on both Windows and Linux.

Thanks,
Mengda
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20090714/f591854b/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: extrude_closed.geo
Type: application/octet-stream
Size: 193 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20090714/f591854b/attachment.geo>