[Gmsh] Surface mesh of an STL model

Mike B. mb78aa at yahoo.com
Wed Jul 29 11:49:07 CEST 2009


Hi Dave,

Thanks for the prompt reply.

So to STL mesh is determined by whatever created the STL model?.

Cheers,
Mike.

--- On Wed, 7/29/09, David Colignon <David.Colignon at ulg.ac.be> wrote:

From: David Colignon <David.Colignon at ulg.ac.be>
Subject: Re: [Gmsh] Surface mesh of an STL model
To: "Mike B." <mb78aa at yahoo.com>
Cc: "Gmsh mai. lis." <gmsh at geuz.org>
Date: Wednesday, July 29, 2009, 7:38 PM

Hi Mike,

from:  http://www.geuz.org/pipermail/gmsh/2008/003744.html

....
Gmsh will not remesh these STL faces, though. It's something we will
reintroduce at some point, but the remesher is not ready yet.
....


Cheers,

Dave


--
David Colignon, Ph.D.
Collaborateur Logistique du F.R.S.-FNRS
CÉCI - Consortium des Équipements de Calcul Intensif
ACE - Applied & Computational Electromagnetics
Institut Montefiore B28
Université de Liège
4000 Liège - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
WWW:    http://hpc.montefiore.ulg.ac.be/
Agenda: http://www.google.com/calendar/embed?src=david.colignon%40gmail.com


Mike B. wrote:
> Dear All,
> 
> I have an STL model which I load (with the `Merge' command)  into Gmsh. The model is a boundary representation (a shell).
> 
> When meshing this model (and others), the mesh on the surface of the model seems fixed and unaffected by the characteristic length settings. Any suggestions how to control this surface mesh (preferably with fields)?.
> 
> Here is a simple script which loads `sph.stl', a sphere shell in saved STL format:
> 
> Mesh.CharacteristicLengthFromPoints = 0;
> Mesh.CharacteristicLengthExtendFromBoundary = 1;
> Mesh.CharacteristicLengthFromCurvature = 0;
> Mesh.Format = 1;
> Mesh.CharacteristicLengthMin = 0.01;
> Mesh.CharacteristicLengthMax = 0.05;
> Merge "sph.stl";
> Surface Loop( 1 ) = { 1 };
> Mesh 2;
> Save "sph.msh";
> 
> Cheers,
> Mike.
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh




      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20090729/ea00226a/attachment.html>