[Gmsh] Qt support?

Christophe Geuzaine cgeuzaine at ulg.ac.be
Mon Dec 13 17:57:53 CET 2010


On 13/12/10 17:51, Nico Schlömer wrote:
> Ah, so I best ignore ENABLE_QT.
>

Right, unless you want to experiment a bit. In this case, just turn FLTK 
support off and a very minimal (just a window, really) Qt app should be 
built. (See code in gmsh/Qt/)

> Cheers,
> Nico
>
>
> On Mon, Dec 13, 2010 at 8:56 AM, David Colignon
> <David.Colignon at ulg.ac.be>  wrote:
>> Hi Nico,
>>
>> there is not yet a real Qt version of Gmsh, just some small trials...
>>
>> Regards,
>>
>> Dave
>>
>> --
>> David Colignon, Ph.D.
>> Collaborateur Logistique du F.R.S.-FNRS
>> CÉCI - Consortium des Équipements de Calcul Intensif
>> ACE - Applied&  Computational Electromagnetics
>> Sart-Tilman B28
>> Université de Liège
>> 4000 Liège - BELGIQUE
>> Tél: +32 (0)4 366 37 32
>> Fax: +32 (0)4 366 29 10
>> WWW:    http://hpc.montefiore.ulg.ac.be/
>> Agenda: http://www.google.com/calendar/embed?src=david.colignon%40gmail.com
>>
>>
>> On 13/12/10 02:50, Nico Schlömer wrote:
>>>
>>> Hi,
>>>
>>> I fail to configure Gmsh with Qt support, and I'm not quite sure where
>>> my mistake is. My CMake configure line looks like
>>>
>>> cmake -C
>>> /var/tmp/paludis/sci-libs-gmsh-2.5.0/temp//gentoo_common_config.cmake
>>> -DCMAKE_INSTALL_PREFIX=/usr -DENABLE_BLAS_LAPACK=OFF -DENABLE_CGNS=OFF
>>> -DENABLE_CHACO=OFF -DENABLE_FLTK=ON -DENABLE_FL_TREE=ON
>>> -DENABLE_GRAPHICS=ON -DENABLE_MED=OFF -DENABLE_METIS=ON
>>> -DENABLE_TAUCS=OFF -DENABLE_QT=ON -DENABLE_OCC=OFF
>>> -DCMAKE_BUILD_TYPE=Gentoo -DCMAKE_INSTALL_DO_STRIP=OFF
>>>
>>> -DCMAKE_USER_MAKE_RULES_OVERRIDE=/var/tmp/paludis/sci-libs-gmsh-2.5.0/temp//gentoo_rules.cmake
>>>   /var/tmp/paludis/sci-libs-gmsh-2.5.0/work/gmsh-2.5.0-source
>>>
>>> and everything seems fine, but later on during the CMake run I read
>>>
>>> Gmsh has been configured for Linux with the following options: Ann
>>> Bamg DIntegration Dlopen FlTree Fltk GMP Gmm Have64BitSizeT Jpeg
>>> Kbipack Lua MathEx Mesh Metis Mpeg NativeFileChooser Netgen OpenGL
>>> Parser Plugins Png Post Readline Solver Tetgen Zlib
>>>
>>> and the final program doesn't look like it's using Qt at all either.
>>>
>>> Any hint?
>>>
>>> Cheers,
>>> Nico
>>>
>>> _______________________________________________
>>> gmsh mailing list
>>> gmsh at geuz.org
>>> http://www.geuz.org/mailman/listinfo/gmsh
>>
>>
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>


-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine