[Gmsh] Nonconformal mesh (AW: import external-generated geometry in gmsh)

[Zenker, Dr. Matthias]

Hi,

the problem of nonconformal mesh at volume interfaces is still not resolved (see old posts below); the "cut and merge faces" algorithm works only in simple cases. I would like to know if there is work going on to solve this problem within gmsh. A full solution would have to be able to treat partially overlapping faces of arbitrary shape.

What is your point of view regarding this problem?

Thank you,

Matthias

----------------------------------------------------------------
Von: Zenker, Dr. Matthias
Gesendet: Mittwoch, 26. September 2012 13:05
An: 'Jean-François Remacle'
Cc: gmsh at geuz.org
Betreff: AW: [Gmsh] import external-generated geometry in gmsh

Hi,

the problem of nonconformal mesh at volume interfaces is really annoying.

I have tried to find a solution by processing a surface mesh with a scilab script, cutting and merging duplicated interfaces, redefining the volumes and doing the 3D mesh in gmsh. My tool is not mature yet since the handling of partially overlapping surfaces is not working like it should. But it works for duplicated surfaces which are identical, even in cases when the "cut and merge faces" recently implemented in gmsh fails.

Do I understand correctly from the message below ("We can imagine to modify the algorithm and mesh series of connected volumes together.") that there is a solution within gmsh in sight? Is there actually work going on at this field?

If I can contribute to a solution, I would be glad to do so.

Best regards,

Matthias


Von: Jean-François Remacle [mailto:jean-francois.remacle at uclouvain.be]
Gesendet: Mittwoch, 26. September 2012 11:10
An: Stefan.Kremer at Schoeck.de<mailto:Stefan.Kremer at Schoeck.de>
Cc: gmsh at geuz.org<mailto:gmsh at geuz.org>
Betreff: Re: [Gmsh] import external-generated geometry in gmsh


Le 25 sept. 2012 à 08:59, Stefan.Kremer at Schoeck.de<mailto:Stefan.Kremer at Schoeck.de> a écrit :

Hello Prof. Geuzaine
hello Prof. Remacle,

i have a question to your great tool gmsh:

Is there any possibility to generate a three-dimensional geometry (with several domains (=different materials) with an external software
then import and mesh it with gmsh?

Yes : we handle STEP, BREP and IGES inputs.

I have tried this with freeCAD and exported a brep-file of my geometry but the problem is that common faces of volume bodies in the geometry
was saved twice (each belongs to one domain) and so the gmsh' mesh-algorithmus was not able to mesh the domains correctly.

It is possible that freecad outputs volumes that have one face in common and that face is duplicated. In this case, our basic 3D mesh
actually fails because all volumes are meshed together and this particular situation generates duplicated points. We can imagine to
modify the algorithm and mesh series of connected volumes together. Another way is to save volumes separately with freecad, mesh
them and merge meshes.

Maybe there is another way, generating a 3D-geometry (should be scriptable) and match the domains with material properties so that getdp could solve the problem.

Do you have any ideas or hints?

Thanks in advance for your help

Best regards from south-germany
Stefan Kremer


Dipl.-Phys. Stefan Kremer
Strategic Productmanagement

Schöck Bauteile GmbH
Vimbucher Straße 2
76534 Baden-Baden

Tel.      +49 7223 967-204
Fax      +49 7223 967-7204
Mobil   +49 173 5717495
stefan.kremer at schoeck.de<mailto:stefan.kremer at schoeck.de>_______________________________________________
gmsh mailing list
gmsh at geuz.org<mailto:gmsh at geuz.org>
http://www.geuz.org/mailman/listinfo/gmsh

------------------------------------------------------------------
Prof. Jean-Francois Remacle
Universite catholique de Louvain (UCL)
Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering
Institute of Mechanics, Materials and Civil Engineering (iMMC)
Center for Systems Engineering and Applied Mechanics (CESAME)
Tel : +32-10-472352 -- Mobile : +32-473-909930









_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20130201/916baf00/attachment.html>