[Gmsh] mixing lines and circles impossible ?

[Julien Derr]

Thanks so much for the quick reply! I just didn't know that gmsh was ;
sensitive... then I built a non working example, but my real code was
just missing the ; !!
thanks again,

Julien

On Tue, Feb 19, 2013 at 3:16 PM, Ruth V. Sabariego
<r.sabariego at ulg.ac.be> wrote:
> With the corrections of Jean-François, this is the working geo file:
>
>
>
> Ruth
>
>
> On 19 Feb 2013, at 15:08, Jean-François Remacle
> <jean-francois.remacle at uclouvain.be> wrote:
>
> there are 3 syntax errors (lines 7, 28 and 29 should be ended by a ";")
>
> Then
>
> Circle(112)={101,102,4};
>
> points 102 and 4 are at the same position, 102 being the center and 4 being
> the end point of the circle arc
>
> JFR
>
> Le 19 févr. 2013 à 13:41, Julien Derr <julien.derr at gmail.com> a écrit :
>
> <fromweb.geo>
>
>
> ------------------------------------------------------------------
> Prof. Jean-Francois Remacle
> Universite catholique de Louvain (UCL)
> Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering
> Institute of Mechanics, Materials and Civil Engineering (iMMC)
> Center for Systems Engineering and Applied Mechanics (CESAME)
> Tel : +32-10-472352 -- Mobile : +32-473-909930
>
>
>
>
>
>
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>
>
> —
> Dr. Ir. Ruth V. Sabariego
> University of Liege, Electrical Engineering and Computer Science
> http://ace.montefiore.ulg.ac.be/
>
>
>
>
>
>
>
>