[Gmsh] gmsh error, 3D mesh did not carried out properly

[Zenker, Dr. Matthias]

Hi,

you surfaces and volumes wer somehow ill-defined. I have redefined them with the GUI, and the 3D meshing works.

HTH,

Matthias

Von: Jun Fei [mailto:seeddestinyplan91 at gmail.com]
Gesendet: Mittwoch, 4. Dezember 2013 08:11
An: gmsh
Betreff: [Gmsh] gmsh error, 3D mesh did not carried out properly

good day every one... currently i have use gmsh as my meshing tools, and the geometry that i wan to mesh is a 3D geometry, after click at the "3D" button, it appear that meshing only take out at the surface, but the internal part of the geometry appear to be not being meshed....

the first image show how my surface mesh looks like, but when look at the second image, can be seen that inside the model is totally blank.. if i not judge wrongly it mean the 3d mesh is not carried out...

 can anyone can give me some opinion about what is the causes of this issue?  and did i left out anything in my geo file, hope every one kindly can help me out...
here i have attach my geo file and the image of the error



_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20131204/a2bb96e0/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: delete reverse modified.geo
Type: application/octet-stream
Size: 12713 bytes
Desc: delete reverse modified.geo
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20131204/a2bb96e0/attachment.geo>