[Gmsh] Calculating current in a rotor slot during Post processing.

Aravind Chandran chandran.aravind at gmail.com
Wed Jan 22 10:34:31 CET 2014


Hello all, 

I have the solution for a 2D model of an induction machine loaded onto 
GMSH. In the solution I have current densities in the rotor slot and the 
stator slots of the machine. I want to calculate the current in each rotor 
slot of the machine. Since the current density in the slots are variable 
radially, I would have to do some kind of integration to calculate the 
current in each rotor slot. The following figure shows the current 
densities in each slot. Is there way to narrow down to each geometry and do 
an integration of the current densities in each slots using the plugin 
integrate ? . I have been trying to use cutMesh and it didn't seem to work 
as well. 

Hoping somebody can help me with this.

Warm Regards

Aravind


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20140122/7ce6faab/attachment.html>