[Gmsh] Could not orient surface normal ?

[Christophe Geuzaine]

> On 11 Nov 2015, at 10:53, Aleksejs Fomins <aleksejs.fomins at lspr.ch> wrote:
> 
> Dear GMSH,
> 
> I have a model for a cavity simulation necessary for my PhD.
> 
> 2D mesh works fine, 3D mesh throws a bunch of warnings like
> 
>  Warning : Converged for i=7 j=5 (err=1.81843e-08 iter=2) BUT xyz error = 12.5473 in point (-1.604927e+01,-5.104927e+01,4.445920e+01) on surface 123
> 
> and produces a completely rubbish mesh. I attach the geometry and the full error log.
> 

The geometry seems wrong: there are overlapping curves (orphaned, colored in orange in the attached picture).


> Any advice would be appreciated.
> 
> Kind regards,
> Aleksejs Fomins
> <cavity-rectangular-rev-1400.geo><error.txt>_______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Tetrahedron V, July 4-5 2016: http://tetrahedron.montefiore.ulg.ac.be
Free software: http://gmsh.info | http://getdp.info | http://onelab.info

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20151115/2e3e3d53/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: problem.png
Type: image/png
Size: 47330 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20151115/2e3e3d53/attachment-0001.png>