[Gmsh] Editing imported file in GUI

Christophe Geuzaine cgeuzaine at ulg.ac.be
Wed Feb 3 17:59:37 CET 2016


> On 03 Feb 2016, at 03:28, Aaron Kiefer <AKiefer at accident-research.com> wrote:
> 
> GMSH Users,
>  
> I’ve suffered through a few hours of removing volumetric parts of my.geo file so it can be meshed in 2D.  From working through the menus with GMSH, it appears that the .geo file cannot be displayed with solid surfaces as a .step file can?  If anyone has ideas, please let me know – I’m going cross eyed staring at the little crossed surface regions trying to determine which surface belongs where.

Indeed... As a workaround, just mesh the surfaces - you can then select them by clicking the mesh.

>  
> Thanks,
>  
>  
> Aaron J. Kiefer MSME, PE
> Accident Research Specialists, PLLC
> 1631 NW Maynard Road, Suite 101
> Cary, NC 27513
> Phone:  (919) 467-8134
> Fax:        (919) 678-1261
> Cell:        (919) 810-8429
> Email:    akiefer at accident-research.com
> Web:      www.accident-research.com
> Email Confidentiality Notice:  The information contained in this transmission is confidential, proprietary, and/or privileged.  The message is intended for the sole use of the individual or entity to whom it is addressed.  If you are not the intended recipient, please be advised that any use, distribution, or copying of the message is strictly prohibited and may be subject to penalties,  If you received this transmission in error, please contact the sender immediately and delete this material from any computer.
>  
>  
>  
> From: Aaron Kiefer 
> Sent: Tuesday, February 2, 2016 9:06 AM
> To: 'gmsh at onelab.info'
> Subject: Editing imported file in GUI
>  
> Gents,
>  
> I’m attempting to edit a .geo file that I imported as a .step from Solidworks using the GUI in GMSH 2.11.  I’d like to display the surfaces as shaded solids so I know which ones I’m selecting.  The ‘solid’ surface display is selected in the geometry/visibility tab but GMSH appears to be showing the ‘wireframe’ or maybe the ‘cross’ surface display? 
>  
> Thanks in advance,  
>  
> Aaron J. Kiefer MSME, PE
> Accident Research Specialists, PLLC
> 1631 NW Maynard Road, Suite 101
> Cary, NC 27513
> Phone:  (919) 467-8134
> Fax:        (919) 678-1261
> Cell:        (919) 810-8429
> Email:    akiefer at accident-research.com
> Web:      www.accident-research.com
> Email Confidentiality Notice:  The information contained in this transmission is confidential, proprietary, and/or privileged.  The message is intended for the sole use of the individual or entity to whom it is addressed.  If you are not the intended recipient, please be advised that any use, distribution, or copying of the message is strictly prohibited and may be subject to penalties,  If you received this transmission in error, please contact the sender immediately and delete this material from any computer.
>  
> <Planar Geometry.PNG>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Tetrahedron V, July 4-5 2016: http://tetrahedron.montefiore.ulg.ac.be
Free software: http://gmsh.info | http://getdp.info | http://onelab.info




More information about the gmsh mailing list