[Gmsh] cylinder rotation problem

[Vincent Huber]

On line 22, you are introducing some Layers(4); that are - to my best
understanding, I’m not familiar with that - for structured meshes only.
I’ve successfully meshed your .geo removing that Layers(4);.
​

2016-03-11 13:07 GMT+01:00 Javier Leonardo Rojas Amaya <
jlrojasam at unal.edu.co>:

> Hello
>
> I want to mesh a rotated cylinder surface, my .geo file is attached.
>
> The problem is that any time a rotate the cylinder, meshing gets loads of
> errors and the mesh itself looks quite weird.  if I don't rotate, meshing
> is ok.
>
> I read there is a kind of problem with rotations onto extruded surfaces,
> and tried using  Geometry.ExactExtrusion=0; at the beginning of my file,
> but still does not work.
>
> I wonder  what I'm doing wrong!
>
> or how could it be done right.
>
> I am using  gmsh 2.11.0
>
>
> Leonardo Rojas,
>
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh
>
>


-- 
Docteur Ingénieur de recherche
CeMoSiS <http://www.cemosis.fr> - vincent.huber at cemosis.fr
Tel: +33 (0)3 68 8*5 02 06*
IRMA - 7, rue René Descartes
67 000 Strasbourg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20160312/902304a8/attachment.html>