[Gmsh] which med version is supported with gmsh .2.11.0 and above

[Christophe Trophime]

Christophe TROPHIME 
Research Engineer 

CNRS - LNCMI 
25, rue des Martyrs 
BP 166 
38042 GRENOBLE Cedex 9 
FRANCE 

Tel : +33 (0)4 76 88 90 02 
Fax : +33 (0) 4 76 88 10 01 
Office U 19 
M at il : christophe.trophime at lncmi.cnrs.fr 

----- Original Message -----
> From: "Christophe Geuzaine" <cgeuzaine at ulg.ac.be>
> To: "Christophe Trophime" <christophe.trophime at lncmi.cnrs.fr>
> Cc: gmsh at geuz.org
> Sent: Wednesday, March 30, 2016 11:30:10 AM
> Subject: Re: [Gmsh] which med version is supported with gmsh .2.11.0 and above
> 
> 
> > On 30 Mar 2016, at 09:15, Christophe Trophime
> > <christophe.trophime at lncmi.cnrs.fr> wrote:
> > 
> > 
> > ----- Original Message -----
> >> From: "Christophe Geuzaine" <cgeuzaine at ulg.ac.be>
> >> To: "Christophe Trophime" <christophe.trophime at lncmi.cnrs.fr>
> >> Cc: gmsh at geuz.org
> >> Sent: Tuesday, March 29, 2016 10:33:57 PM
> >> Subject: Re: [Gmsh] which med version is supported with gmsh .2.11.0 and
> >> above
> >> 
> >> 
> >> Hi Christophe,
> >> 
> >> I don't think we ever tried compiling with MED >= 3.0.6. Where can we get
> >> the
> >> latest MED release? (Any big changes in this release?)
> > 
> > Hi Christophe,
> > I've tried with MED 3.8.0 and it works like a charm
> > The changes happen with 3.10 version.
> > You could retreive latest version from Salome
> > http://www.salome-platform.org/downloads/current-version
> > 
> 
> Weird, I recompiled MED 3.1.0 and everything seems to work ok here.
> 
> Can you send a small test case with instructions on how to reproduce the
> issue?

I've just remad the test with gmsh 2.12 and it works...
Maybe I've made some mistakes at some point

Sorry for the trouble
Best
C

> 
> Thanks,
> 
> Christophe
> 
> >> 
> >> Christophe
> >> 
> >>> On 25 Mar 2016, at 09:35, Christophe Trophime
> >>> <christophe.trophime at lncmi.cnrs.fr> wrote:
> >>> 
> >>> Hi,
> >>> I used to compile gmsh 2.11.0 with MED support.
> >>> It works for until I move to MED 3.1.0.
> >>> 
> >>> With MED 3.1.0 when I save a MED mesh into a GMSH mesh
> >>> the elements (ie tetra) are not saved in .msh file!!!
> >>> 
> >>> That's very annoying.
> >>> Did someone experience that issue?
> >>> Is it fix in  recent gmsh version?
> >>> 
> >>> Best
> >>> C
> >>> 
> >>> 
> >>> 
> >>> Christophe TROPHIME
> >>> Research Engineer
> >>> 
> >>>    CNRS - LNCMI
> >>> 25, rue des Martyrs
> >>> BP 166
> >>> 38042 GRENOBLE Cedex 9
> >>> FRANCE
> >>> 
> >>> Tel : +33 (0)4 76 88 90 02
> >>> Fax : +33 (0) 4 76 88 10 01
> >>> Office U 19
> >>> M at il : christophe.trophime at lncmi.cnrs.fr
> >>> 
> >>> _______________________________________________
> >>> gmsh mailing list
> >>> gmsh at onelab.info
> >>> http://onelab.info/mailman/listinfo/gmsh
> >> 
> >> --
> >> Prof. Christophe Geuzaine
> >> University of Liege, Electrical Engineering and Computer Science
> >> http://www.montefiore.ulg.ac.be/~geuzaine
> >> 
> >> Tetrahedron V, July 4-5 2016: http://tetrahedron.montefiore.ulg.ac.be
> >> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> >> 
> >> 
> 
> --
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
> 
> Tetrahedron V, July 4-5 2016: http://tetrahedron.montefiore.ulg.ac.be
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> 
>