[Gmsh] #288: Invalid cells for a fine mesh around a sharp leading edge

[GARNAUD Xavier (SAFRAN)]

Here is an example that gives a similar error (it is not exactly the same but I had to modify the geometry).

In this case, replacing the cylinder by an edge attractor solves the problem. In my other case it does not.
Best regards,

Xavier

-----Message d'origine-----
De : Gmsh [mailto:gmsh at ace20.montefiore.ulg.ac.be] 
Envoyé : dimanche 29 mai 2016 09:52
Objet : Re: [Gmsh] #288: Invalid cells for a fine mesh around a sharp leading edge

#288: Invalid cells for a fine mesh around a sharp leading edge
-------------------+-----------------------
Reporter:  gmsh    |       Owner:  geuzaine
    Type:  defect  |      Status:  accepted
Priority:  minor   |  Resolution:
Keywords:          |
-------------------+-----------------------
Changes (by geuzaine):

 * owner:   => geuzaine
 * status:  new => accepted


Comment:

 Could you attach a small example?

--
Ticket URL: <https://onelab.info/trac/gmsh/ticket/288#comment:1>
Gmsh <http://gmsh.info>
A three-dimensional finite element mesh generator with built-in pre- and post-processing facilities
#
" Ce courriel et les documents qui lui sont joints peuvent contenir des informations confidentielles, être soumis aux règlementations relatives au contrôle des exportations ou ayant un caractère privé. S'ils ne vous sont pas destinés, nous vous signalons qu'il est strictement interdit de les divulguer, de les reproduire ou d'en utiliser de quelque manière que ce soit le contenu. Toute exportation ou réexportation non autorisée est interdite Si ce message vous a été transmis par erreur, merci d'en informer l'expéditeur et de supprimer immédiatement de votre système informatique ce courriel ainsi que tous les documents qui y sont attachés."
******
" This e-mail and any attached documents may contain confidential or proprietary information and may be subject to export control laws and regulations. If you are not the intended recipient, you are notified that any dissemination, copying of this e-mail and any attachments thereto or use of their contents by any means whatsoever is strictly prohibited. Unauthorized export or re-export is prohibited. If you have received this e-mail in error, please advise the sender immediately and delete this e-mail and all attached documents from your computer system."
#