[Gmsh] Re-orient surface normals

[Praveen Kumar]

Hi,

I am importing a .stl file (normals oriented inwards) and the creating
Compound Surfaces before generating 2D mesh.

But the problem is, in the final 2d surface mesh the surface normals are
random or different from the input stl file.

Is there a way to keep the surface normals same as that of the input file.

Best Regards
-- 
Praveen Kumar R | Technical Manager
*Centre for Computational Technologies - CCTech *
1 Akshay Residancy | 50 Anand Park | Aundh | Pune | 411007 | India
Ph: +91 20 40098381/82 | M: +91-9923406816 | www.cctech.co.in
*CCTech – "*

*Transforming human life by democratization of technology"*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20160909/d0807ab7/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: troubleshoot.geo
Type: application/octet-stream
Size: 398 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20160909/d0807ab7/attachment-0001.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: inlet.rar
Type: application/rar
Size: 258084 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20160909/d0807ab7/attachment-0001.rar>