[Gmsh] aaaaaaaaaaaaaaargh

[jeremy theler]

Thanks Christophe.
I am aware of such cost. Maybe it could be lowered by switching to git and
take advantage of its branching and merging mechanisms...


On Mon, Oct 3, 2016 at 1:43 PM Christophe Geuzaine <cgeuzaine at ulg.ac.be>
wrote:

>
> Hi Jeremy - I've removed both debug statements from SVN; this is the cost
> of living on the bleeding edge ;-)
>
> > On 3 Oct 2016, at 15:37, German Theler <gtheler at seamplex.com> wrote:
> >
> > Hi all
> >
> > Following up with (still unresolved) hard-coded printfs,
> > http://onelab.info/pipermail/gmsh/2016/010837.html
> > I am now getting the message 'aaaaaaaaaaaaaaargh':
> >
> > gtheler at tom:~/codigos/3ros/gmsh$ svn blame Mesh/meshGRegion.cpp | grep
> > -C3 aaaaaaaaaaaaaaargh
> > 12845   geuzaine
> > 12808    remacle       for(int j = 0; j < 3; j++){
> > 22971    ajohnen         if (out.trifacelist[i * 3 + j] - 1 >=
> > initialSize){
> > 22971    ajohnen           printf("aaaaaaaaaaaaaaargh\n");
> > 22971    ajohnen           //        if(v[j]->onWhat()->dim() == 3){
> > 22971    ajohnen           v[j]->onWhat()->mesh_vertices.erase
> > 22971    ajohnen
> > (std::find(v[j]->onWhat()->mesh_vertices.begin(),
> > gtheler at tom:~/codigos/3ros/gmsh$
> >
> >
> > Any comment or solution is appreciated.
> > Thanks!
> >
> > --
> > Jeremy Theler
> > www.seamplex.com
> >
> >
> >
> > _______________________________________________
> > gmsh mailing list
> > gmsh at onelab.info
> > http://onelab.info/mailman/listinfo/gmsh
>
> --
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine
>
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20161003/47f634aa/attachment-0001.html>