[Gmsh] Antwort: Re: Illegal Instructions

[paul.carrico at free.fr]

yes I confirm it works now after the upgrade 

Many thanks 

Paul 

Le 2017-06-23 06:53, m.schoening at e-und-a.ch a écrit : 

> Hi all, 
> 
> this binary works perfect! 
> 
> Best regards, 
> 
> ppa. Marc C. Schöning 
> Dr.-Ing. 
> Leiter Forschung & Entwicklung / Head of R&D 
> Mitglied der Geschäftsleitung / Member of the Management 
> ---------------------------------------------------- 
> e+a 
> Elektromaschinen und Antriebe AG 
> Bachstrasse 10 
> 4313 Moehlin 
> SWITZERLAND 
> ---------------------------------------------------- 
> Phone +41 61 855 92 92 
> Fax +41 61 855 92 99 
> Mail m.schoening at e-und-a.ch 
> 
> http://www.e-und-a.ch [1 [1]] 
> ---------------------------------------------------- 
> 
> CONFIDENTIALITY NOTICE 
> This communication and the information it contains is 
> intended for the person(s) or organisation(s) named 
> above and no other person(s) or organisation(s) and 
> may be confidential, legally privileged and protected 
> by law. Unauthorised use, copying or disclosure of any 
> of it may be unlawful. If you have received this 
> communication in error, please contact us immediately 
> by email, telephone or facsimile. We will be happy to 
> accept a reversed charge call (call collect). 
> 
> Von:        Christophe Geuzaine <cgeuzaine at ulg.ac.be> 
> An:        m.schoening at e-und-a.ch, paul.carrico at free.fr 
> Kopie:        gmsh at onelab.info 
> Datum:        22.06.2017 23:27 
> Betreff:        Re: [Gmsh] Illegal Instructions 
> 
> -------------------------
> 
> Marc, Paul - Could you try the latest git snapshot
> 
> http://gmsh.info/bin/Linux/gmsh-git-Linux64.tgz [2 [2]]
> 
> It is now linked with a less "aggressive" BLAS library, which should
> work on Core2 and higher.
> 
> Christophe
> 
>> On 22 Jun 2017, at 15:21, m.schoening at e-und-a.ch wrote:
>> 
>> Dear List,
>> 
>> I get an "Illegal Instructions" error in gmsh 3.0.2 when trying to
> mesh 2d models. The meshing is possible with version 2.16. 
> 
>> The error only occurs on some computers on our cluster system, but
> on these computers, the error is reproducible. 
> 
>> Here are the processors, where the error occurs:
>> 
>> AMD Phenom(tm) II X4 965 Processor
>> Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
>> Intel(R) Xeon(R) CPU E5410 @ 2.33GHz
>> AMD Athlon(tm) II X2 250 Processor @ 3Ghz
>> 
>> The error does not occur on the following processors:
>> Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz
>> AMD Opteron(TM) Processor 6220 3.00GHz
>> Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz
>> Intel Core2 Duo E6850 3.00GHz
>> 
>> Best regards,
>> 
>> ppa. Marc C. Schöning
>> Dr.-Ing.
>> Leiter Forschung & Entwicklung / Head of R&D
>> Mitglied der Geschäftsleitung / Member of the Management
>> ----------------------------------------------------
>> e+a
>> Elektromaschinen und Antriebe AG
>> Bachstrasse 10
>> 4313 Moehlin
>> SWITZERLAND
>> ----------------------------------------------------
>> Phone +41 61 855 92 92
>> Fax +41 61 855 92 99
>> Mail m.schoening at e-und-a.ch
>> 
>> http://www.e-und-a.ch [1 [1]]
>> ----------------------------------------------------
>> 
>> CONFIDENTIALITY NOTICE
>> This communication and the information it contains is
>> intended for the person(s) or organisation(s) named
>> above and no other person(s) or organisation(s) and
>> may be confidential, legally privileged and protected
>> by law. Unauthorised use, copying or disclosure of any
>> of it may be unlawful. If you have received this
>> communication in error, please contact us immediately
>> by email, telephone or facsimile. We will be happy to
>> accept a reversed charge call (call collect).
>> 
>> CONFIDENTIALITY NOTICE
>> This communication and the information it contains is intended for
> the person(s) or organisation(s) named above and no other person(s) or
> organisation(s) and may be confidential, legally privileged and
> protected by law. 
> 
>> Unauthorised use, copying or disclosure of any of it may be
> unlawful. If you have received this communication in error, please
> contact us immediately by email, telephone or facsimile. We will be
> happy to accept a reversed charge call (call
> collect)._______________________________________________ 
> 
>> gmsh mailing list
>> gmsh at onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
> 
> -- 
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science 
> http://www.montefiore.ulg.ac.be/~geuzaine
> 
> Free software: http://gmsh.info | http://getdp.info |
> http://onelab.info
> 
> CONFIDENTIALITY NOTICE
> This communication and the information it contains is intended for the
> person(s) or organisation(s) named above and no other person(s) or
> organisation(s) and may be confidential, legally privileged and
> protected by law.
> Unauthorised use, copying or disclosure of any of it may be unlawful.
> If you have received this communication in error, please contact us
> immediately by email, telephone or facsimile. We will be happy to
> accept a reversed charge call (call collect).
> 
> Links:
> ------
> [1] http://www.e-und-a.ch/
> [2] http://gmsh.info/bin/Linux/gmsh-git-Linux64.tgz
 

Links:
------
[1] http://www.e-und-a.ch/
[2] http://gmsh.info/bin/Linux/gmsh-git-Linux64.tgz
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20170623/0076d8ba/attachment.html>