[Gmsh] RE Error in caption value

[jean pierre aubry]

bonjour

j'ai modifié les données de "Displacements /z  - TIME 10"
voir le fichier joint

on peut voir les groupes
et le bon signe sur z, la vue est maintenant un scalaire, c'est à dire
sans visu de la déformation

par contre j'ai enlevé la vue vectorielle

et le fichier est dépourvu d'un .opt additionnel

j'espère que cela peut aider

-- 
jean pierre aubry
jeanpierre[at]lamachine.fr
33 688 670 795

On Tue, 18 Jul 2017 19:37:20 +0200, paul.carrico at free.fr wrote :
>>Erratum on my previous email: I forgot that even if I remove the .opt
>>file, the caption still shows positive values ... so ? 
>>
>>Paul 
>>
>>Le 2017-07-18 17:25, paul.carrico at free.fr a écrit :
>>
>>> First of all thanks for the answer: 
>>> 
>>> a) "there are none defined in the submitted .msh file" 
>>> 
>>> In my understanding :  
>>> 
>>> 1rst column : number 
>>> 
>>> 2nd col : type (17 for 2nd order hex) 
>>> 
>>> 3rd col : number opf tags before node list 
>>> 
>>> 4th col : physical number (1 here) 
>>> 
>>> 5th col : elementary number i.e. the geometry number from the
>>> element belongs (pure post-processing here if I'm right -> put to
>>> 0) 
>>> 
>>> 1 17 2 1 0 81 103 900 883 83 105 902 885 92 532 82 549 104 894 901
>>> 884 94 534 551 895 
>>> 
>>> b) "i would say in the .mesh.opt file something is probably wrong
>>> in the definition of the component" ... I agree I know I'm doing
>>> something wrong, but I've not found the issue yet :-) 
>>> 
>>> c) "then comes another question why writing the results like this
>>> and not in a regular .pos file" --> .pos is a legacy format, not
>>> the latest one ... One of the next target is to use .med format if
>>> possible (I tried ounce to export data but I've had only mesh) 
>>> 
>>> Paul 
>>> 
>>> Le 2017-07-18 16:33, jean pierre aubry a écrit :
>>> 
>>>> hello
>>>> 
>>>> no wonder you cannot see any group
>>>> there are none defined in the submitted .msh file
>>>> 
>>>> now from view[3]
>>>> with
>>>> Visibility > Force Scalar > 2 (z component)
>>>> and
>>>> General > Range mode Custom » Min and Max button pushed 
>>>> you can see the signed values of z displacement
>>>> 
>>>> i would say in the .mesh.opt file 
>>>> something is probably wrong in the definition of the component
>>>> you should choose the proper scalar component
>>>> however i do not know how to !!
>>>> 
>>>> then comes another question why writing the results like this and
>>>> not in a regular .pos file
-------------- next part --------------
A non-text attachment was scrubbed...
Name: poutre_NL-2.msh
Type: application/octet-stream
Size: 292341 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20170719/a13191f4/attachment-0001.msh>