[Gmsh] 2.9.3 - Bug in 6th order hexa .msh saving

Marie-Claire Le Pape marie-claire.le_pape at onera.fr
Mon Jun 25 15:35:24 CEST 2018


Hello,

It seems that .msh file coming from 6th order hexa grid is not correct.

The hexa description in the .msh file produced with the attached .geo 
file after 6th order grid generation contains duplicated nodes :
73, 74, 75, 76 98, 99 100, 101, 123, 124, 125, 126, 148, 149, 150, 151, 
173, 174, 175 176, 198, 199, 200, 201
and some nodes lack :
89, 90 91, 92, 114, ...

Normally, the hexa description ought to contain the 343 first numbers in 
the increasing order and from 1 to 343.

The hexa .msh files produced with the same procedure from 1 to 5th order 
are ok.

The version I use is a bit old, perhaps the bug has been corrected since it.

Marie-Claire

-------------- next part --------------
A non-text attachment was scrubbed...
Name: cube0_hexa.geo
Type: application/vnd.dynageo
Size: 1248 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20180625/82540b85/attachment.geo>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cube0_hexa_o6.msh
Type: model/mesh
Size: 18638 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20180625/82540b85/attachment.msh>


More information about the gmsh mailing list