[Gmsh] cant export geo file as brep or step

Mark Smith piedycat at yahoo.com
Thu Aug 23 17:58:37 CEST 2018


Hi Christophe,
Thanks for the quick reply. I was wanting to get the model into netgen to try and mesh it to see if I could get better quality elements, so I suppose I will have to rebuild the geometry again from scratch:-(RegardsMark




   On Thursday, August 23, 2018, 2:57:46 PM GMT+1, Christophe Geuzaine <cgeuzaine at uliege.be> wrote:  
 
 
Hi Mark,

Gmsh never translates between CAD formats. If you want to export as BREP or STEP, you should build your model using the OpenCASCADE factory.

Christophe

> On 23 Aug 2018, at 14:49, Mark Smith <piedycat at yahoo.com> wrote:
> 
> Hi gmsh forum
> I have a 3D geometry as a .geo file and want to export it for use elsewhere, when I try to export as brep or step I get the error : No OpenCASCADE model found? is there a setting required so I can do this?
> I get this error with gmsh versions 3.06 or 4.0.0
> 
> best regards
> Mark
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info


_______________________________________________
gmsh mailing list
gmsh at onelab.info
http://onelab.info/mailman/listinfo/gmsh
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20180823/ceb7baa8/attachment.html>


More information about the gmsh mailing list