[Gmsh] duplicate result views
morok at mevex.com
Sat Aug 25 17:37:12 CEST 2018
Thinking about the .opt file, of course it doesn't work the second time:
the view is numbered differently. The other problem hopefully has a real
On Sat, Aug 25, 2018 at 11:34 AM, Max Orok <morok at mevex.com> wrote:
> Here is your basic solver (it seems any solver will do) and a mesh file
> that shows the issue.
> With the solver open, open the .msh file. There should be two duplicate
> views loaded into the GUI.
> In addition, the .opt file (to not open the view automatically) is ignored
> the second time it is loaded.
> Without the solver loaded (i.e. no run button in the gui) the duplicate
> views don't show up.
> I think the problem may be bound up in the database files; I had an old
> .db file that when loaded, did not have this problem.
> On Sat, Aug 25, 2018 at 3:35 AM, Christophe Geuzaine <cgeuzaine at uliege.be>
>> Can you send an example?
>> > On 23 Aug 2018, at 22:48, Max Orok <morok at mevex.com> wrote:
>> > Hi everyone,
>> > On loading simulation results into the Gmsh GUI after running a C++
>> solver from it, there are duplicates of each view loaded. It seems the
>> solver is running twice, the second time loading the views? Is there anyway
>> to disable this?
>> > --
>> > Max Orok
>> > Summer Student
>> > www.mevex.com
>> > _______________________________________________
>> > gmsh mailing list
>> > gmsh at onelab.info
>> > http://onelab.info/mailman/listinfo/gmsh
>> Prof. Christophe Geuzaine
>> University of Liege, Electrical Engineering and Computer Science
>> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> Max Orok
> Summer Student
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the gmsh