[Gmsh] Boundary layer extrusion

Christophe Geuzaine cgeuzaine at uliege.be
Mon Sep 24 20:16:16 CEST 2018



> On 24 Sep 2018, at 10:12, Luca Verzeroli <luca.verzeroli at serioplast.com> wrote:
> 
> Hi,
> 
> how can I solve this error message?
> 
> .Error   : 'ORFrank.geo', line 40 : Boundary layer extrusion not available with OpenCASCADE geometry kernel
> 

The message says it all: the operation is not yet supported with the OpenCASCADE kernel... There's quite a bit of work involved in supporting this.


> I need OpenCASCADE for the Fillet Feature.
> 
> 
> -- 
> Luca Verzeroli
> R&D Process Engineer - Global Headquarters
> 
> Tel. +39 0352657411
> Mob. +39 3207240806
> 
> Serioplast Global Services Spa
> Via Spirano, 528
> 24059 Urgnano (BG) - Italy
> 
> www.serioplast.com
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info




More information about the gmsh mailing list