[Gmsh] crash when generating 3D mesh

Christophe Geuzaine cgeuzaine at uliege.be
Thu Feb 14 17:04:59 CET 2019


PS : issue solved - the Netgen mesh optimizer (deactivated by default) was the culprit.

> On 14 Feb 2019, at 15:48, Christophe Geuzaine <cgeuzaine at uliege.be> wrote:
> 
> 
> Seems ok with 4.1.5 - give it a try.
> 
>> On 14 Feb 2019, at 15:14, Alessandro Vicini <alessandro.vicini at sitael.com> wrote:
>> 
>> 
>> 
>> Gmsh (v4.0.5) crashes when generating the 3D mesh for the attached thruster.geo file (plus background.geo which is merged into it). This happens after I added the cone at the end of the geo file, to embed its external surface in the volume. Any reason for this...? Thank you.
>> 
>> A.
>> <thruster.geo><background.geo>_______________________________________________
>> gmsh mailing list
>> gmsh at onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
> 
>> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science 
> http://www.montefiore.ulg.ac.be/~geuzaine
> 
> 
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine






More information about the gmsh mailing list