[Gmsh] gmsh 4.2 and step files

[Christophe Geuzaine]

> On 7 Mar 2019, at 13:43, Giorgio Palma <gior.palma at gmail.com> wrote:
> 
> Dear All,
> I found a strange behaviour in the latest version of gmsh when opening a stl file. When I open the attached file with an older version (like 4.1.5) everything it's fine, all the geometry pieces are in the right place. Gmsh 4.2 fails in sense that opens just the first geometry part of the stl file (exported from Freecad).
> Can this be a bug or am I doing something wrong?

It's indeed a regression (for STEP files that don't have a global compound shape). The fix is quite simple - we will release Gmsh 4.2.1 with the patch.

Thanks for the feedback!

Christophe


> <test2.step>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20190307/50ccbb9c/attachment.html>