[Gmsh] Possible Error in Tetrahedral Meshing

[Jackman, K, Dr [kjackman@sun.ac.za]]

Dear Christophe,

Thank you for your prompt reply.

I can successfully mesh the geometry file with Gmsh, without any errors, but the tetrahedral mesh does not seem to be correct at some locations. The faces of some tetrahedrons (please see attached images) are not aligned correctly, and therefore, not properly connected. I have attached the mesh file and some images to demonstrate the problem.

Best regards,
Kyle


________________________________
From: Christophe Geuzaine <cgeuzaine at uliege.be>
Sent: Monday, 08 April 2019 3:30 PM
To: Jackman, K, Dr [kjackman at sun.ac.za]
Cc: gmsh at onelab.info
Subject: Re: [Gmsh] Possible Error in Tetrahedral Meshing



> On 8 Apr 2019, at 12:47, Jackman, K, Dr [kjackman at sun.ac.za] <kjackman at sun.ac.za> wrote:
>
> To Whom It May Concern,
>
> I have noticed some errors in the tetrahedral meshes, generated by Gmsh (both v3.0.6 and v4.2.2). Under certain circumstances, e.g. volumes with holes, some tetrahedron elements do not align with adjacent tetrahedrons. An example is attached that demonstrates this error, including images that show the location of the edges that do not connect.
>
> I have tried several geometric examples, including meshing algorithms (surface and volume), but this does not fix the problem. The attached example seems to work when selecting “Mesh.Algorithm = 2;”, but this is not always the case for other geometries.
>
> Hopefully, this is just a simple mistake in my geometry file.

The file you sent meshes fine here will all the algorithms. Can you send the .msh file that you think is wrong?

Christophe

>
> Best regards,
> Kyle
>
>
> The integrity and confidentiality of this email are governed by these terms. Disclaimer
> Die integriteit en vertroulikheid van hierdie e-pos word deur die volgende bepalings bereël. Vrywaringsklousule <Gmsh_error_overview.zip>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

—
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20190408/e7a2eda2/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mesh_file_and_images.zip
Type: application/x-zip-compressed
Size: 2293913 bytes
Desc: mesh_file_and_images.zip
URL: <http://onelab.info/pipermail/gmsh/attachments/20190408/e7a2eda2/attachment-0001.zip>