[Gmsh] Virtual topology problem

[Jeremy Theler]

If anyone is interested, that very same case can be solved
directly from Onshape in less than 30 seconds:

https://youtu.be/iure4rn6GRg

In a couple of weeks I will add the possibility to download the .step
and .geo to modify it offline.

Regards
--
jeremy theler
www.seamplex.com

On Mon, 2019-07-22 at 21:47 +0200, Martin Kraska wrote:
> Hello, 
> 
> in the attached script I try to mesh a step part using virtual
> topology (trying to update the example 
> https://github.com/mkraska/CalculiX-Examples/tree/master/CAD/OnshapeTutorial
> )
> I see that I have to use a new syntax for virtual topology but
> otherwise did not make any changes compared to gmsh 3.0.3 which I
> tried last.
> 
> In gmsh 4.3.0 I get a boundary mesh issue.
> In 4.4.0 the virtual topology is just ignored but the part is meshed.
> in the git version of today (2019-07-22) I get a slightly different
> boundary mesh issue.
> 
> Did I miss some settings? Or is the part just too nasty?
> 
> Thanks for any advice, Martin Kraska
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> 
> http://onelab.info/mailman/listinfo/gmsh
>