[Gmsh] unstructured periodic surface

Christophe Geuzaine cgeuzaine at uliege.be
Thu Jul 25 14:30:51 CEST 2019



> On 24 Jul 2019, at 23:15, Junting Chen <chen112p at uwindsor.ca> wrote:
> 
> Hello Christophe,
> 
> I guess I didn't explain my problem clearly.
> 
> I need to create conformal surfaces that every mesh node on one surface is mirror-imaged onto the other, also I need to create refinement fields. I find it impossible to be done with these two tasks together.
> 

Send the smallest possible example that exhibits the issue so we can have a look.

Christophe

> Junting Chen
> 
> On Tue, Jul 23, 2019 at 2:47 PM Christophe Geuzaine <cgeuzaine at uliege.be> wrote:
> 
> Hi Justin,
> 
> See e.g. https://gitlab.onelab.info/gmsh/gmsh/blob/master/demos/boolean/periodic.geo
> 
> Christophe
> 
> > On 18 Jul 2019, at 17:20, Junting Chen <chen112p at uwindsor.ca> wrote:
> > 
> > Hello all, this might be answered previously but i wasn't really able to find a good solution yet. 
> > 
> > I have created a bounding box and extracted my target geometry out by the boolean operation. The next step I want to do is to force the two side planes having the same mesh. I think I should use the periodic command but i can never make it work properly.
> > 
> > Periodic Line{5} = {21} ;
> > Periodic Line{1} = {3} ;
> > Periodic Line{7} = {24} ;
> > Periodic Line{6} = {23} ;
> > Periodic Surface {5}= {6};
> > 
> > I kept on getting error message like "Affine transformation requires at least 12 entries". 
> > 
> > I have attached my .geo file as well as the step file if anyone doesn't mind to do a brief run. 
> > 
> > Thanks a lot for your help!
> > 
> > Junting Chen
> > <concaveTower.geo><concaveTower.stp>_______________________________________________
> > gmsh mailing list
> > gmsh at onelab.info
> > http://onelab.info/mailman/listinfo/gmsh
> 
>> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science 
> http://www.montefiore.ulg.ac.be/~geuzaine
> 
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

— 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine






More information about the gmsh mailing list