[Gmsh] question about python api

Frederic Dubois frederic.dubois at umontpellier.fr
Thu Nov 28 22:42:34 CET 2019


Hi Christophe,

You are right, this is the best way.

Can you comment this ?
f.remove(sphere1)
f.remove(sphere2)

Regards

----- Mail original -----
> De: "Christophe Geuzaine" <cgeuzaine at uliege.be>
> À: "Frederic Dubois" <frederic.dubois at umontpellier.fr>
> Cc: "gmsh" <gmsh at onelab.info>
> Envoyé: Jeudi 28 Novembre 2019 21:31:12
> Objet: Re: [Gmsh] question about python api

>> On 28 Nov 2019, at 20:06, Frederic Dubois <frederic.dubois at umontpellier.fr>
>> wrote:
>> 
>> Dear all,
>> 
>> I am trying to mesh a composite material made of paste and grains.
>> Since I have to do some Boolean operation on a 3D volume of composite I tried to
>> use the occ factory.
>> At the end of the day I need a continuous mesh where paste elements of the mesh
>> belong to a paste physical group and grains elements belong to an other
>> physical group.
>> 
>> In the attached script I first create a cylinder and two grains.
>> Using a cut I was able to obtain a mesh with all the elements belonging to the
>> paste.
>> Using a fuse I was able to obtain a mesh with all the elements belonging to the
>> grains.
>> Unfortunately, it seems that the two meshes are separated.
>> 
>> I tried to fuse them to obtain a continuous mesh but I am not sure it works fine
>> and that it is the proper method.
>> 
>> Any advice ?
> 
> Simpler to use fragments:
> 
> 
> 
> 
> Christophe
> 
> 
>> 
>> Regards
>> 
>> --
>> Frédéric Dubois, PhD, Eng.
>> ---
>> Directeur adjoint du LMGC.
>> Laboratoire de Mécanique et Génie Civil - CNRS/UM
>> cc 048, 163 rue Auguste Broussonnet, 34090 Montpellier
>> http://www.lmgc.univ-montp2.fr/~dubois
>> Tel: 33/0 467144984
>> Mobile: 33/0 635490843
>> <composite.py>_______________________________________________
>> gmsh mailing list
>> gmsh at onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
> 
>> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science
> http://www.montefiore.ulg.ac.be/~geuzaine

-- 
Frédéric Dubois, PhD, Eng.
---
Directeur adjoint du LMGC.
Laboratoire de Mécanique et Génie Civil - CNRS/UM
cc 048, 163 rue Auguste Broussonnet, 34090 Montpellier
http://www.lmgc.univ-montp2.fr/~dubois
Tel: 33/0 467144984
Mobile: 33/0 635490843



More information about the gmsh mailing list