[Gmsh] question about python api

[cgeuzaine at uliege.be]

> Le 29 nov. 2019 à 11:58, Frederic Dubois <frederic.dubois at umontpellier.fr> a écrit :
> 
> Hi,
> 
> You are right gmsh.fltk.run()is my problem ; I thought that once you close the graphical interface it finishes the script ...
> 

Indeed we should fix that!

Christophe 



> Regards
> 
> ----- Mail original -----
>> De: "Christophe Geuzaine" <cgeuzaine at uliege.be>
>> À: "Frederic Dubois" <frederic.dubois at umontpellier.fr>
>> Cc: "gmsh" <gmsh at onelab.info>
>> Envoyé: Vendredi 29 Novembre 2019 09:39:38
>> Objet: Re: [Gmsh] question about python api
> 
>>> On 29 Nov 2019, at 09:06, Frederic Dubois <frederic.dubois at umontpellier.fr>
>>> wrote:
>>> 
>>> Hi Christophe,
>>> 
>>> In fact I did things in the "complicated" way to be able to recover the 2D
>>> elements on the skin of the grains.
>>> 
>>> Using fragments, these elements are not created or saved even if I create a 2D
>>> physical group (here "itz".
>>> 
>> 
>> Works fine here. (Maybe you left gmsh.fltk.run() in the script? Saving the mesh
>> happens afterwards...)
>> 
>> Christophe
>> 
>>> Using the "complicated" way, how can I remove the duplicated nodes (like using
>>> coherence in .geo file) ?
>>> I tried to do this by fusing the two meshes but I am not confident in the
>>> result.
>>> 
>>> Regards
>>> 
>>> ----- Mail original -----
>>>> De: "Christophe Geuzaine" <cgeuzaine at uliege.be>
>>>> À: "Frederic Dubois" <frederic.dubois at umontpellier.fr>
>>>> Cc: "gmsh" <gmsh at onelab.info>
>>>> Envoyé: Jeudi 28 Novembre 2019 23:12:28
>>>> Objet: Re: [Gmsh] question about python api
>>> 
>>>>> On 28 Nov 2019, at 22:42, Frederic Dubois <frederic.dubois at umontpellier.fr>
>>>>> wrote:
>>>>> 
>>>>> Hi Christophe,
>>>>> 
>>>>> You are right, this is the best way.
>>>>> 
>>>>> Can you comment this ?
>>>>> f.remove(sphere1)
>>>>> f.remove(sphere2)
>>>> 
>>>> Fragment tries hard to keep intact the tags of those entities that have not been
>>>> modified, here the two spheres. So I remove these two from the list of returned
>>>> entities, which gives me the remaining (new) volume - the paste.
>>>> 
>>>> Christophe
>>>> 
>>>> 
>>>>> 
>>>>> Regards
>>>>> 
>>>>> ----- Mail original -----
>>>>>> De: "Christophe Geuzaine" <cgeuzaine at uliege.be>
>>>>>> À: "Frederic Dubois" <frederic.dubois at umontpellier.fr>
>>>>>> Cc: "gmsh" <gmsh at onelab.info>
>>>>>> Envoyé: Jeudi 28 Novembre 2019 21:31:12
>>>>>> Objet: Re: [Gmsh] question about python api
>>>>> 
>>>>>>> On 28 Nov 2019, at 20:06, Frederic Dubois <frederic.dubois at umontpellier.fr>
>>>>>>> wrote:
>>>>>>> 
>>>>>>> Dear all,
>>>>>>> 
>>>>>>> I am trying to mesh a composite material made of paste and grains.
>>>>>>> Since I have to do some Boolean operation on a 3D volume of composite I tried to
>>>>>>> use the occ factory.
>>>>>>> At the end of the day I need a continuous mesh where paste elements of the mesh
>>>>>>> belong to a paste physical group and grains elements belong to an other
>>>>>>> physical group.
>>>>>>> 
>>>>>>> In the attached script I first create a cylinder and two grains.
>>>>>>> Using a cut I was able to obtain a mesh with all the elements belonging to the
>>>>>>> paste.
>>>>>>> Using a fuse I was able to obtain a mesh with all the elements belonging to the
>>>>>>> grains.
>>>>>>> Unfortunately, it seems that the two meshes are separated.
>>>>>>> 
>>>>>>> I tried to fuse them to obtain a continuous mesh but I am not sure it works fine
>>>>>>> and that it is the proper method.
>>>>>>> 
>>>>>>> Any advice ?
>>>>>> 
>>>>>> Simpler to use fragments:
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> 
>>>>>> Christophe
>>>>>> 
>>>>>> 
>>>>>>> 
>>>>>>> Regards
>>>>>>> 
>>>>>>> --
>>>>>>> Frédéric Dubois, PhD, Eng.
>>>>>>> ---
>>>>>>> Directeur adjoint du LMGC.
>>>>>>> Laboratoire de Mécanique et Génie Civil - CNRS/UM
>>>>>>> cc 048, 163 rue Auguste Broussonnet, 34090 Montpellier
>>>>>>> http://www.lmgc.univ-montp2.fr/~dubois
>>>>>>> Tel: 33/0 467144984
>>>>>>> Mobile: 33/0 635490843
>>>>>>> <composite.py>_______________________________________________
>>>>>>> gmsh mailing list
>>>>>>> gmsh at onelab.info
>>>>>>> http://onelab.info/mailman/listinfo/gmsh
>>>>>> 
>>>>>> —
>>>>>> Prof. Christophe Geuzaine
>>>>>> University of Liege, Electrical Engineering and Computer Science
>>>>>> http://www.montefiore.ulg.ac.be/~geuzaine
>>>>> 
>>>>> --
>>>>> Frédéric Dubois, PhD, Eng.
>>>>> ---
>>>>> Directeur adjoint du LMGC.
>>>>> Laboratoire de Mécanique et Génie Civil - CNRS/UM
>>>>> cc 048, 163 rue Auguste Broussonnet, 34090 Montpellier
>>>>> http://www.lmgc.univ-montp2.fr/~dubois
>>>>> Tel: 33/0 467144984
>>>>> Mobile: 33/0 635490843
>>>> 
>>>> —
>>>> Prof. Christophe Geuzaine
>>>> University of Liege, Electrical Engineering and Computer Science
>>>> http://www.montefiore.ulg.ac.be/~geuzaine
>>> 
>>> --
>>> Frédéric Dubois, PhD, Eng.
>>> ---
>>> Directeur adjoint du LMGC.
>>> Laboratoire de Mécanique et Génie Civil - CNRS/UM
>>> cc 048, 163 rue Auguste Broussonnet, 34090 Montpellier
>>> http://www.lmgc.univ-montp2.fr/~dubois
>>> Tel: 33/0 467144984
>>> Mobile: 33/0 635490843
>>> <composite.py><composite_simpler.py>
>> 
>> —
>> Prof. Christophe Geuzaine
>> University of Liege, Electrical Engineering and Computer Science
>> http://www.montefiore.ulg.ac.be/~geuzaine
> 
> -- 
> Frédéric Dubois, PhD, Eng.
> ---
> Directeur adjoint du LMGC.
> Laboratoire de Mécanique et Génie Civil - CNRS/UM
> cc 048, 163 rue Auguste Broussonnet, 34090 Montpellier
> http://www.lmgc.univ-montp2.fr/~dubois
> Tel: 33/0 467144984
> Mobile: 33/0 635490843