[Gmsh] Creating 3D geometry

[Max Orok]

Hi Deepa,

What sort of 3D geometry are you trying to get? Are those tubes or some
sort of tunnel cutout of a solid?
This looks pretty cool :)

Max


On Sat, Jan 4, 2020 at 10:47 AM Deepa <deepamahm.iisc at gmail.com> wrote:

> Hello Everyone,
>
> I want to generate a 3D geometry of the below image.
>
> [image: ske1.png]
>
> I could generate a centerline image using image processing tools in
> Mathematica.
> [image: centerline1.png]
>
> However, I'm not sure how to make use of this centerline image to create a
> 3D geometry.
> Any suggestions on how to create the 3D geometry from the above images in
> gmsh will be really helpful.
>
> Thanks a lot,
> Deepa
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh
>


-- 
Max Orok
Contractor
www.mevex.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20200104/dbed4d35/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ske1.png
Type: image/png
Size: 1652 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20200104/dbed4d35/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: centerline1.png
Type: image/png
Size: 1274 bytes
Desc: not available
URL: <http://onelab.info/pipermail/gmsh/attachments/20200104/dbed4d35/attachment-0001.png>