[Gmsh] Gmsh OCC class Physical Groups

[Rinaldi Polese Petrolli]

Hi,

Hope everything is good. I'm working merging two meshes into one via the
.cut OCC class method, but my output has all the Physical Groups defined as
0, even when adding a PhysicalGroup to the model. Here's a quick example.

gmsh.model .occ.addPlaneSurface([-(12 + i)], i + 2 + 100)
gmsh.model.addPhysicalGroup(2, [i + 2 + 100], i + 2 + 100)

When I open the meshes all of the surfaces have the same PhysicalGorup
index. Is there a way to use the OCC class and set Physical Groups as it
can be done using the geo class?

Thanks!
-- 
Rinaldi Petrolli
Acoustic Engineer
Walters-Storyk Design Group
Architectural Acoustic Consulting
Media Systems Engineering
262 Martin Avenue
<https://www.google.com/maps/place/WSDG+-+Walters-Storyk+Design+Group/@41.779992,-73.9967305,15z/data=!4m5!3m4!1s0x0:0x5691bbfa0a6698a4!8m2!3d41.779992!4d-73.9967305>
Highland, NY 12528, USA
<https://www.google.com/maps/place/WSDG+-+Walters-Storyk+Design+Group/@41.779992,-73.9967305,15z/data=!4m5!3m4!1s0x0:0x5691bbfa0a6698a4!8m2!3d41.779992!4d-73.9967305>
O +1 845 691 9300
F +1 845 691 9361
rinaldi.petrolli at wsdg.com <http://goog_1434455421/>
www.wsdg.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20200219/ae788e4c/attachment.html>