[Gmsh] Could not recover boundary mesh: error 2

[Jean-François Remacle]

It seems your model is so complicated we cannot recover the surface mesh in 3D

JF

> Le 2 avr. 2020 à 14:49, Bruno <bruno.agostini at gmail.com> a écrit :
> 
> Dear Gmsh users,
> 
> When importing and trying to 3D mesh a STL file I get the following error message:
> 
> "Could not recover boundary mesh: error 2"
> 
> But in gmsh output nothing seems to be wrong apart from this message (see attached log) .
> 
> Therefore I can't figure out what the problem is. Any idea?
> 
> Best regards
> 
> Bruno Agostini
> 
> <gmsh_error.log>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fonelab.info%2Fmailman%2Flistinfo%2Fgmsh&data=02%7C01%7Cjean-francois.remacle%40uclouvain.be%7C66a3759b9f7844bc6bbd08d7d70879a8%7C7ab090d4fa2e4ecfbc7c4127b4d582ec%7C0%7C0%7C637214303753872574&sdata=DQCLukFKCE5X4gywFraK7oIhtp8bHmjJqQ2JV84rzFU%3D&reserved=0

------------------------------------------------------------------
Prof. Jean-Francois Remacle
Universite catholique de Louvain (UCL)
Ecole Polytechnique de Louvain (EPL) - Louvain School of Engineering
Institute of Mechanics, Materials and Civil Engineering (iMMC)
Center for Systems Engineering and Applied Mechanics (CESAME)
Tel : +32-10-472352 -- Mobile : +32-473-909930