[Gmsh] From an image to mesh

David Colignon David.Colignon at ulg.ac.be
Thu Jul 5 09:44:35 CEST 2007


Hi Francesco,

you are right, it doesn't work anymore with the latest 2.0.7 version, I'll have to check it with the "author"...

In the meantime, you can use the old 1.65 version at http://geuz.org/gmsh/bin/

Dave

-- 
David Colignon, Ph.D.
ELAP - Service d'Electricité Appliquée
Institut Montefiore B28
Université de Liège
4000 Liège - BELGIQUE
Tél: +32 (0)4 366 37 32
Fax: +32 (0)4 366 29 10
http://elap.montefiore.ulg.ac.be

Francesco Pappalardo wrote:
> Hi David.
> 
> I tried what you highlighted, but I did not obtain the same result. I
> used the author's photo, the script and then I saved the generated 2d mesh.
> 
> David Colignon wrote:
>> Hi,
>>
>> you can have a look at the upper right corner of http://geuz.org
>>
>> Cheers,
>>
>> Dave
>>
>>
>> Francesco Pappalardo wrote:
>>> Dear all,
>>>
>>> I am interested in knowing how the author of the screenshot lenny was
>>> able to meshing the image. I am trying to obtain a mesh from a so simply
>>> image without any result. The written mesh file was always empty.
>>>
>>> Thank you.
>>>
>>>
>>> _______________________________________________
>>> gmsh mailing list
>>> gmsh at geuz.org
>>> http://www.geuz.org/mailman/listinfo/gmsh
> 
> 
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh