[Gmsh] From an image to mesh

=?windows-1252?Q?Jean-Fran=8D=E7ois_Remacle?= remacle at gce.ucl.ac.be
Thu Jul 5 09:45:45 CEST 2007


Francesco Pappalardo a écrit :
> Hi David.
>
> I tried what you highlighted, but I did not obtain the same result. I
> used the author's photo, the script and then I saved the generated 2d mesh.
>
>   
the use of this feature is quite tricky

Plugin(Evaluate).Expression = "v0 * 10";


is only valid for christophe's photo, you have to tune it for yourself

> David Colignon wrote:
>   
>> Hi,
>>
>> you can have a look at the upper right corner of http://geuz.org
>>
>> Cheers,
>>
>> Dave
>>
>>
>> Francesco Pappalardo wrote:
>>     
>>> Dear all,
>>>
>>> I am interested in knowing how the author of the screenshot lenny was
>>> able to meshing the image. I am trying to obtain a mesh from a so simply
>>> image without any result. The written mesh file was always empty.
>>>
>>> Thank you.
>>>
>>>
>>> _______________________________________________
>>> gmsh mailing list
>>> gmsh at geuz.org
>>> http://www.geuz.org/mailman/listinfo/gmsh
>>>       
>
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh
>
>   


-- 
--------------
Prof. Jean-François Remacle
Department of Civil Engineering and
Center for Systems Engineering and Applied Mechanics 
Université catholique de Louvain, Belgium 
Tel : +32 10 472082 
Fax : +32 10 472210