[Gmsh] Gmsh cannot read .med file produced by Salome

[jean pierre aubry]

here is an example only lines, 36, and nodes, 36, no surfaces
Le Tue, 22 May 2012 19:44:11 +0200,
Christophe Geuzaine <cgeuzaine at ulg.ac.be> a écrit :

> 
> On 22 May 2012, at 14:38, jean pierre aubry wrote:
> 
> > hello
> > 
> > when i try to read a .med file (one containing a mesh, no results)
> > produced by Salome i get the following console lines
> > Info    : Reading
> > '/dedalus/salome/examples/jacopo/Model_Test/CAE12_002_12.mail.med'...
> > Info    : Reading MED file V3.0.4 using MED library V3.0.2 Info    :
> > Reading 3-D unstructured mesh <<COMPLESSIVO>> Info    : Done reading
> > '/dedalus/salome/examples/jacopo/Model_Test/CAE12_002_12.mail.med'
> > but nothing appears on the screen when i do Tools>Statics>Mesh i
> > can see O Nodes on Lines, O for every entry i can read the same
> > file with Salome
> > 
> 
> Hello Jean-Pierre - Can you send a (small) test file?
> 
> > 
> > and i can read any med file created within Gmsh
> > 
> > any idea of what is wrong
> > 
> > jean pierre aubry
> > 
> > _______________________________________________
> > gmsh mailing list
> > gmsh at geuz.org
> > http://www.geuz.org/mailman/listinfo/gmsh
> 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: grille_nl.mail.med
Type: audio/x-mod
Size: 42720 bytes
Desc: not available
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20120523/caed1542/attachment.med>