[Gmsh] Gmsh cannot read .med file produced by Salome

[Christophe Geuzaine]

On 23 May 2012, at 05:39, jean pierre aubry wrote:

> here is an example only lines, 36, and nodes, 36, no surfaces

Hi Jean-Pierre - The example works on my machine; did you maybe just forget to display the mesh nodes and line elements (which are hidden by default)?

> Le Tue, 22 May 2012 19:44:11 +0200,
> Christophe Geuzaine <cgeuzaine at ulg.ac.be> a écrit :
> 
>> 
>> On 22 May 2012, at 14:38, jean pierre aubry wrote:
>> 
>>> hello
>>> 
>>> when i try to read a .med file (one containing a mesh, no results)
>>> produced by Salome i get the following console lines
>>> Info    : Reading
>>> '/dedalus/salome/examples/jacopo/Model_Test/CAE12_002_12.mail.med'...
>>> Info    : Reading MED file V3.0.4 using MED library V3.0.2 Info    :
>>> Reading 3-D unstructured mesh <<COMPLESSIVO>> Info    : Done reading
>>> '/dedalus/salome/examples/jacopo/Model_Test/CAE12_002_12.mail.med'
>>> but nothing appears on the screen when i do Tools>Statics>Mesh i
>>> can see O Nodes on Lines, O for every entry i can read the same
>>> file with Salome
>>> 
>> 
>> Hello Jean-Pierre - Can you send a (small) test file?
>> 
>>> 
>>> and i can read any med file created within Gmsh
>>> 
>>> any idea of what is wrong
>>> 
>>> jean pierre aubry
>>> 
>>> _______________________________________________
>>> gmsh mailing list
>>> gmsh at geuz.org
>>> http://www.geuz.org/mailman/listinfo/gmsh
>> 
> 
> <grille_nl.mail.med>

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine