[Gmsh] Problem generating a hole inside a volume

[Zenker, Dr. Matthias]

Hi,

there was no attachment...

Matthias

Von: Mauricio Vinassa [mailto:mvinassa at gmail.com]
Gesendet: Freitag, 21. Februar 2014 01:18
An: gmsh at geuz.org
Betreff: [Gmsh] Problem generating a hole inside a volume

Hi all,
I am kind new in mesh generation, is not my expertise area at all.
I am trying to generate a 3D mesh to a volume with a hole inside, seems to be very simple, but I tried everything (hope not everything) but couldn't got it. I tried changing my volume geometries several time, changing my 3D algorithm to frontal, etc etc but none of these worked.
I attached a .geo file (simplified model), which is a simplification of my model, with the surfaces loop generation and the volume.
If you can take a look at it and see where is my problem I would be very grateful, at this time I don't know what else to try. \
Thanks
Mauricio


_____________________________________________________________________
ERBE Elektromedizin GmbH
Firmensitz: 72072 Tuebingen
Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
Registergericht: Stuttgart HRB 380137

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20140221/9cc8dc3f/attachment.html>