[Gmsh] Editing imported file in GUI

Aaron Kiefer AKiefer at accident-research.com
Tue Feb 2 15:06:28 CET 2016


I'm attempting to edit a .geo file that I imported as a .step from Solidworks using the GUI in GMSH 2.11.  I'd like to display the surfaces as shaded solids so I know which ones I'm selecting.  The 'solid' surface display is selected in the geometry/visibility tab but GMSH appears to be showing the 'wireframe' or maybe the 'cross' surface display?

Thanks in advance,

Aaron J. Kiefer MSME, PE
Accident Research Specialists, PLLC
1631 NW Maynard Road, Suite 101
Cary, NC 27513
Phone:  (919) 467-8134
Fax:        (919) 678-1261
Cell:        (919) 810-8429
Email:    akiefer at accident-research.com<mailto:akiefer at accident-research.com>
Web:      www.accident-research.com<http://www.accident-research.com/>
Email Confidentiality Notice:  The information contained in this transmission is confidential, proprietary, and/or privileged.  The message is intended for the sole use of the individual or entity to whom it is addressed.  If you are not the intended recipient, please be advised that any use, distribution, or copying of the message is strictly prohibited and may be subject to penalties,  If you received this transmission in error, please contact the sender immediately and delete this material from any computer.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20160202/d9893e7c/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Surface Display.JPG
Type: image/jpeg
Size: 156208 bytes
Desc: Surface Display.JPG
URL: <http://onelab.info/pipermail/gmsh/attachments/20160202/d9893e7c/attachment-0001.JPG>

More information about the gmsh mailing list