[Gmsh] problems (with opencascade?)

[Christophe Geuzaine]

> On 25 Sep 2017, at 15:31, Alessandro Vicini <alessandro.vicini at sitael.com> wrote:
> 
> 
> In fact that's what I did in the meantime as a workaround.
> I'll wait for the bug to be fixed, thank you!

This should now be fixed on the master branch. Note that your .geo file contains a small mistake (Surface 47 is redefined).

CG

> 
> A.
> 
> -----Messaggio originale-----
> Da: Christophe Geuzaine [mailto:cgeuzaine at ulg.ac.be] 
> Inviato: lunedì 25 settembre 2017 15:26
> A: Alessandro Vicini
> Cc: gmsh at onelab.info
> Oggetto: Re: [Gmsh] problems (with opencascade?)
> 
> 
> Hi Alessandro,
> 
> There seems to be a little bug with "newp". As a workaround set
> 
> p1 = 1000;
> 
> in Farfield.geo and everything will be ok.
> 
> Christophe
> 
>> On 22 Sep 2017, at 08:59, Alessandro Vicini <alessandro.vicini at sitael.com> wrote:
>> 
>> 
>> Yesterday I reported a problem I had when merging "farfield.geo" at the bottom of "test.geo" (both files attached). Now I found out that merging works if I switch to the built-in geometry kernel before (the geometry kernel is set to openCascade at the beginning of test.geo).
>> There are still two problems, though:
>> 
>> 1) The points that are defined in FarField.geo are lost after the 
>> merging operation (I only get lines and surfaces, see attached picture 
>> where points are red. FarField.geo contains the geometry of the outer 
>> shell);
>> 2) If I try to generate the 2D mesh, the code gets stuck in some infinite loop.
>> 
>> Could you please help with these issues? Thank you.
>> 
>> A.
>> 
>> 
>> <Test.geo><FarField.geo><complete.jpg>________________________________
>> _______________
>> gmsh mailing list
>> gmsh at onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
> 
> --
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science http://www.montefiore.ulg.ac.be/~geuzaine
> 
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> 

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info