[Gmsh] Doubt about gmsh

Luca Azzolin azzolinluca at outlook.com
Thu Oct 5 16:03:40 CEST 2017

Dear Mr./Mrs.,

I have been using gmsh to mesh this biventricle_together.stl file. The things that I wanted to do are:

- fill the gap between the external boundary and the 2 internal boundaries with 3D elements ( so that I will have a volume with 2 holes );

- mesh this final volume;

but I had some problems in trying to do that.

I have imported the file as .stl but now how can I create that volume with 2 holes?

Thank you so much.

Best regards,

Luca Azzolin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20171005/38e1d50b/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: biventricle_together_new.stl
Type: application/sla
Size: 1566837 bytes
Desc: biventricle_together_new.stl
URL: <http://onelab.info/pipermail/gmsh/attachments/20171005/38e1d50b/attachment-0001.stl>

More information about the gmsh mailing list