[Gmsh] Error of meshing result of Gmsh

Christophe Geuzaine cgeuzaine at uliege.be
Sun Jan 28 17:06:43 CET 2018



> On 28 Jan 2018, at 17:04, Christophe Geuzaine <cgeuzaine at uliege.be> wrote:
> 
> 
> Dear Jun-yeong,
> 
> In Gmsh 3.0.6 the Surface() command duplicates the curves on its boundary, which in your model leads to some duplicated 1D meshes (you can check by e.g. displaying the line numbers in the gui).
> 
> Download the latest automated snapshot: this issue should be resolved. Attached is your file, modified to work with the newest builds - everything seems ok.
> 

PS: you can remove the last "Coherence;" in the file; I added it for debugging but it is useless (and slows down the model).

> Christophe
> <yoon3d_new.geo>
> 
>> On 28 Jan 2018, at 13:30, 허준영 <lionhjy at gmail.com> wrote:
>> 
>> Hi, I'm a student in Doctor's degree.
>> My main working subjects are geophysical modeling and inversion.
>> 
>> I made simple '.geo' file and tested, but the meshing results have errors in it.
>> My Gmsh version is recent version(3.0.6). I added my '.geo' file and results.
>> 'yoon3d_0.8.mesh' is the result of the h=0.8 in '.geo' file and
>> 'yoon3d_0.2.mesh' is the result of the h=0.2' in '.geo' file.
>> 
>> The first error is the overlapped or duplicated vertices.
>> For example, the point 84 and 120 are in same positions in 'yoon3d_0.8.mesh'
>> And maybe, as the result of the duplicated points, some faces are also intersecting.
>> 
>> Also, if I set smaller meshes, like 'yoon3d_0.2.mesh', severe errors are occur in 2D meshing already.
>> When you take a look at the outer surfaces of the 'yoon3d_0.2.mesh', you can find some surfaces has the triangles which are overlapped badly.
>> 
>> Are these errors the results of the errors in my '.geo' file that I couldn't catch?
>> I can't figure out what's the problem. 
>> 
>> 
>> -- 
>> 
>> Jun-yeong Heo 
>> 
>> Master Student 
>> 
>> Dept.of Energy Systems Engineering, College of Engineering, Seoul National University 
>> 
>> ADDRESS: 1 Gwanak-ro, Gwanak-gu, Seoul, 151-744, Korea 
>> 
>> TEL: +82-2-880-7220 // FAX: +82-2-871-8938 // Mobile: +82-10-8386-8009
>> <yoon3d.geo><yoon3d_0.2.mesh><yoon3d_0.8.mesh>_______________________________________________
>> gmsh mailing list
>> gmsh at onelab.info
>> http://onelab.info/mailman/listinfo/gmsh
> 
> -- 
> Prof. Christophe Geuzaine
> University of Liege, Electrical Engineering and Computer Science 
> http://www.montefiore.ulg.ac.be/~geuzaine
> 
> Free software: http://gmsh.info | http://getdp.info | http://onelab.info
> 
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science 
http://www.montefiore.ulg.ac.be/~geuzaine

Free software: http://gmsh.info | http://getdp.info | http://onelab.info




More information about the gmsh mailing list