[Gmsh] ASCII mesh format

[Christophe Geuzaine]

Hi Yoann - the 2 files you sent are in format 2...

> On 23 Apr 2018, at 15:25, Yoann LE BARS <yoann at le-bars.net> wrote:
> 
> 
> Hello everybody out there!
> 
>     Well, my troubles are not entirely solved yet: when I look at the
> MSH file in version 3, it seems to me that z values are not only zeros.
> But, after converting, in the version 2 file, z values are either 0 or
> values such as 2.220446049250313e-16, so let say zero.
> 
>     However, I have no error message when converting the file:
> 
> $ ./gmsh ~/Données/Cloud/manche/version-maison/manche-maison.msh -save -o ~/Données/Cloud/manche/version-maison/manche-convertie.msh
> 
> Info    : Running './gmsh /home/lebarsy/Données/Cloud/manche/version-maison/manche-maison.msh -save -o /home/lebarsy/Données/Cloud/manche/version-maison/manche-convertie.msh' [Gmsh 3.0.7, 1 node, max. 1 thread]
> 
> Info    : Started on Mon Apr 23 15:15:55 2018
> 
> Info    : Reading '/home/lebarsy/Données/Cloud/manche/version-maison/manche-maison.msh'...
> 
> Info    : 28241 vertices
> 
> Info    : 56522 elements
> 
> Info    : Done reading '/home/lebarsy/Données/Cloud/manche/version-maison/manche-maison.msh'
> 
> Info    : Writing '/home/lebarsy/Données/Cloud/manche/version-maison/manche-convertie.msh'...
> 
> Info    : Done writing '/home/lebarsy/Données/Cloud/manche/version-maison/manche-convertie.msh'
> 
> Info    : Stopped on Mon Apr 23 15:15:55 2018
> 
> 
>     Is this a known issue? Is there a way to re-interpolate a bathymetry
> on a mesh?
> 
>     The two files are not that big, I attach them to this message:
> “manche-maison.msh” is encoded in ASCII version 3 MSH format, while
> “manche-convertie.msh” uses version2.
> 
>     Best regards.
> 
> -- 
> Yoann LE BARS
> http://le-bars.net/yoann
> *Diaspora : ylebars at framasphere.org
> 
> <manche-convertie.msh><manche-maison-v2.msh>_______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh