[Gmsh] Does OCC fillet splines?

Max Orok morok at mevex.com
Wed Jul 29 20:22:11 CEST 2020

Hi Karim,

If possible, you should submit the geo script of your Gmsh session. It will
help to see what you've tried already.


On Wed, Jul 29, 2020 at 1:26 PM Kadry Abdelmeguid Karim Hesham Ahmed <
karim.kadryabdelmeguid at epfl.ch> wrote:

> Hello Gmsh community,
> I am learning how to fillet a volume and I'm running into problems when I
> use closed splines as faces
> I draw a simple closed spline, define a plane surface, extrude it a small
> distance. I then try to fillet the face curve belonging to the extruded
> volume and an error appears which says "could not compute fillet".
> I also tried various radii to check but it did not work either!
> Is the kernel able to fillet spline based edges? I am able to fillet the
> same extruded volume but with circles just fine. Tutorial 19 only deals
> with circles as the face being extruded and not splines (only as
> guidewires) so that's not much help.
> I attached  .brep of the volume that I'm having trouble with.
> Thanks!
> Karim
> _______________________________________________
> gmsh mailing list
> gmsh at onelab.info
> http://onelab.info/mailman/listinfo/gmsh

Max Orok
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://onelab.info/pipermail/gmsh/attachments/20200729/1d30db7e/attachment-0001.html>

More information about the gmsh mailing list