[Getdp] Problem with induction heat geometry

[stefan.braun at smartcae.de]

Hi Matti,
thank you for your help. Now it works.
Best regards,
Stefan Braun

SmartCAE, Munich

On Tuesday, January 29, 2013 5:03:18 PM UTC+1, Matti Pellikka wrote:
>
> Hi, 
>
> I was able to reproduce the issue with the latest nightly build on 64 
> bit Windows 7. I'm investigating the issue, but as a temporary fix, 
> running the mesher from Windows Command Prompt seems to work. 
>
> Open the Windows Command Prompt and go to the directory where both 
> gmsh.exe and indheat.geo are. Run the command: 
>
> gmsh indheat.geo -3 
>
> This creates the mesh file indheat.msh, which you can examine normally 
> using the graphical interface of Gmsh. To solve the induction heating 
> problem, have getdp.exe, indheat.pro and indheat.msh in the same 
> directory and in that directory run in the Command Prompt the command 
>
> getdp indheat.pro -solve MagDynTOComplex -pos MagDynTO 
>
> You can examine the resulting .pos files using the graphical interface of 
> Gmsh. 
>
> Best regards, 
>
> -- 
> Matti Pellikka, Researcher 
> Tampere University of Technology, Electromagnetics 
>
>
> On 29 January 2013 13:12,  <stefan... at smartcae.de <javascript:>> wrote: 
> > Hello Matti, 
> > thank you very much for your help. 
> > I tried the new build 2.6.2 gmesh and the bulid of getdp 2.2.2 and i 
> come 
> > little bit further. 
> > I have no error messages and the mesher starts. 
> > When the mesher reaches reducing cell complex the mesher crashes. 
> > Do you have any idea how to solve this problem, 
> > Thank you very much, 
> > 
> > Best regards, 
> > Stefan Braun 
> > 
> > SmartCAE, Munich 
> > 
> > On Monday, January 28, 2013 10:02:52 AM UTC+1, Matti Pellikka wrote: 
> >> 
> >> Hi Stefan, 
> >> 
> >> The cohomology computation commands on those lines didn't make it to 
> >> the current release version 2.6.1 of Gmsh. However, those commands 
> >> should be available in tomorrow's nightly builds of the development 
> >> version. 
> >> 
> >> Alternatively, you can compile the current development version by 
> >> yourself, check that the build option ENABLE_KBIPACK is ON to enable 
> >> the cohomology computation. 
> >> 
> >> I suspect that you also need the latest development version of GetDP 
> >> to compute the example. 
> >> 
> >> -- 
> >> Matti Pellikka, Researcher 
> >> Tampere University of Technology, Electromagnetics 
> >> 
> >> On 27 January 2013 00:57,  <stefan... at smartcae.de> wrote: 
> >> > Hello Group Members, 
> >> > i want to try out a example of onelab.info about induction heating. 
> >> > 
> >> > If i import the *.geo file in gmsh i get the following error 
> messages. 
> >> > 
> >> > http://onelab.info/files/getdp/Magnetodynamics/GMSH_GETDP/indheat.geo 
> >> > 
> >> > 
> >> > Info    : Reading 'C:\...\indheat.geo'... 
> >> > Info    : Starting subloop 1 in Line Loop 543 (are you sure about 
> this?) 
> >> > Error   : 'C:\...\indheat.geo', line 176 : syntax error (() 
> >> > Error   : 'C:\...\indheat.geo', line 177 : syntax error (() 
> >> > Error   : 'C:\...\indheat.geo', line 186 : syntax error (() 
> >> > Error   : 'C:\...\ndheat.geo', line 187 : syntax error (() 
> >> > 
> >> > 
> >> > 
> >> > Thank you very much help on this problem. 
> >> > Best regards, 
> >> > Stefan Braun 
> >> > 
> >> > SmartCAE, Munich 
> >> > 
> >> > _______________________________________________ 
> >> > getdp mailing list 
> >> > ge... at geuz.org 
> >> > http://www.geuz.org/mailman/listinfo/getdp 
> >> > 
> >> 
> >> _______________________________________________ 
> >> getdp mailing list 
> >> ge... at geuz.org 
> >> http://www.geuz.org/mailman/listinfo/getdp 
>
> _______________________________________________ 
> getdp mailing list 
> ge... at geuz.org <javascript:> 
> http://www.geuz.org/mailman/listinfo/getdp 
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/getdp/attachments/20130129/62bb77d7/attachment-0001.html>