[Gmsh] pre-defined nodes on 1 or 2 surfaces

Pei-Ying Hsieh pei-ying.hsieh.b at bayer.com
Thu May 18 19:14:31 CEST 2006


Dear GMSH experts:

I am still learning gmsh, so, here is another stupid question. (Maybe gmsh 
mailing group should set a quota for number of stupid question per day?)

If I have a volume with 2 sides (surfaces), is it possible to read in a 
set of nodes on 1 (or 2) surfaces.  Triagles will be generated on this 1 
surface (or these 2 surfaces), then, mesh the volume with all TETs.  In 
othere words, this surface(s) has been meshed externally first.

Pei

_______________________________________________________________________________________________

The information contained in this e-mail is for the exclusive use of the intended recipient(s) and may be confidential, proprietary, and/or legally privileged.  Inadvertent disclosure of this message does not constitute a waiver of any privilege.  If you receive this message in error, please do not directly or indirectly use, print, copy, forward, or disclose any part of this message.  Please also delete this e-mail and all copies and notify the sender.  Thank you.

For alternate languages please go to http://bayerdisclaimer.bayerweb.com
_______________________________________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20060518/7b416ae4/attachment.html>