[Gmsh] (no subject)

[Christophe Geuzaine]

Ilgaz Akseli wrote:
> Hi Christophe,
>  
> I have one question about saving the mesh.
>  
> I'm interest in modal analysis(natural frequency) of my cad model, and 
> when I mesh the model in gmesh it provides me some saving options;
>  
> the problem is I want to run my modal analysis in ABAQUS or Pro/E so the 
> only 2 options that Pro/E accepts is STL. and WRL. formats since there 
> is no IGES or SAT formats are provided by gmesh I cannot upload it to 
> ABAQUS.
>  
> So when I open the meshed material in Pro/E, I can easily see the meshed 
> material this part is OK, but it doesn't let me to the analysis. So do 
> you have any suggestions or ideas that how can I do saving or openning 
> my file in those FE programs, or is there a converter that can let me to 
> do it?

Hi Ilgaz - I have no idea which formats ABAQUS accepts... Maybe somebody 
else on this list knows?



>  
> Thank you for your time, I appreciate it.
>  
> Ilgaz
>  
> 
> ________________________________________
> 
> ILGAZ AKSELI
> 
> Doctoral Research Assistant
> 
> Photo-Acoustics Research Laboratory 
> 
> Department of Mechanical and Aeronautical Engineering 
> 
> Clarkson University 
> 
> CAMP 252 Box 5725 
> 
> Potsdam, NY 13699-5725 
> 
> akselii at clarkson.edu <mailto:akselii at clarkson.edu> 
> 
> (315) 268-7683
> 
> Fax: (315) 268-6695 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh


-- 
Prof. Christophe Geuzaine
University of Liege, Electrical Engineering and Computer Science
http://www.montefiore.ulg.ac.be/~geuzaine