[Gmsh] not multiply connected

[Wern Lennart]

Dear Gmsh-user

I am a new user of gmsh and I need some assistance.

I have made a very simple geometry with two volumes that I can mesh without any problems, see attached file.

I want to use my mesh in OpenFOAM and I therfor convert it. In the converting log I get text like the below:

It seems like the two volumes are not connected. How can I connect them? Please help !!!

------------------------------
checkCoords : points 1142 and 492 with coordinates:(250 343.75 70) and (250 343.75 70)
 are relatively close to each other. This might be correct in case of e.g. baffles.
checkCoords : points 491 and 1141 with coordinates:(250 343.75 80) and (250 343.75 80)
 are relatively close to each other. This might be correct in case of e.g. baffles.
checkCoords : points 490 and 1140 with coordinates:(250 343.75 90) and (250 343.75 90)
 are relatively close to each other. This might be correct in case of e.g. baffles.
checkCoords : points 488 and 192 with coordinates:(250 375 20) and (250 375 20)
 are relatively close to each other. This might be correct in case of e.g. baffles.

patch9	146	156	ok (not multiply connected)
patch11	145	155	ok (not multiply connected)
patch33	146	156	ok (not multiply connected)
patch55	145	155	ok (not multiply connected)
------------------------------


Regards,

Lennart Wern
SMHI
Swedish Meteorological and Hydrological Institute
SE-601 76 NORRKÖPING
Sweden

Visiting address: Folkborgsvägen 1
Email: lennart.wern at smhi.se
Phone: +46 11 495 81 49
Fax: +46 11 495 82 50




 <<test_1.geo>> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20070403/2502bb53/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: test_1.geo
Type: application/octet-stream
Size: 608 bytes
Desc: test_1.geo
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20070403/2502bb53/attachment.geo>