[Gmsh] Making structured meshes (cont.)

Matt Gundry mjgundry at faa-engineers.com
Fri Dec 14 23:16:10 CET 2007


I just tested under 2.0.8, and it doesn't work. I've attached the mesh
from 1.59 so you can see what I thought you were after.

Matt

Matt Gundry wrote:
> Jake,
> 
> I think I know what you are trying to do, because I tried to wrap a mesh 
> around an airfoil myself. I've attached a quickie example (tested under 
> 1.59). I roughed in two BSplines that approximated a "polyline" through 
> your points 2-3-7-9, and 1-4-10-6-1(18). A few extra points were added 
> to control the bspline. Obviously it isn't a very accurate rep of your 
> original geometry, but that could be refined.
> 
> Hope that's useful,
> Matt

-- 
Matt Gundry, PE

At Work		mjgundry at faa-engineers.com
Web		http://www.faa-engineers.com/~mjgundry/

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: skew1.msh
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20071214/f317f523/attachment.msh>