[Gmsh] mesh generation

[Ruth V. Sabariego]

Could you send just the section of TOLOMEO LED you used to generate the 
mesh?
If in the imported file there are only surfaces, you should add a 
surface loop to consider the volume and be able to mesh it.

Regards,
Ruth

Stefano Zinna wrote:
> Dear Sirs.
>
> I have a problem when crossing from surface mesh to volume mesh in Gmsh.
> I'm using Gmsh 2.2.4 version. It seems that Gmsh is not able to 
> recognize volumes in the surface mesh attached (56.stl.tar.gz). Also i 
> attach the starting CAD file (TOLOMEO LED.stp.tar.gz) where i took a 
> section to create the surface mesh.
> Let me know if you can help me. Many thanks
>
> best regards,
> Stefano Zinna
> ------------------------------------------------------------------------
>
> _______________________________________________
> gmsh mailing list
> gmsh at geuz.org
> http://www.geuz.org/mailman/listinfo/gmsh

-- 
Dr. Ir. Ruth V. Sabariego
University of Liege, Institut Montefiore,
Dept. of Electrical Engineering & Computer Science, 
Applied & Computational Electromagnetics (ACE),
Sart Tilman Campus, Grande Traverse, 10 (B28), B-4000 LIEGE, Belgium
phone: +32-4-3663737 -- fax: +32-4-3662910 -- http://elap.montefiore.ulg.ac.be/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.geuz.org/pipermail/gmsh/attachments/20081113/ea39149a/attachment.html>