[Gmsh] mesh generation

[Ruth V. Sabariego]

Hi,

I've just meshed you model in 3D using the nightly-build gmsh version 
(2.2.5). 
The volume is detected and meshed.

Regards,
Ruth

Stefano Zinna wrote:
> Hello.
>
> This is the step file of the section i have sent. Let me know if it is 
> what you need. thanks.
>
> regards.
> Stefano
>
>
>
> Ruth V. Sabariego ha scritto:
>> Could you send just the section of TOLOMEO LED you used to generate 
>> the mesh?
>> If in the imported file there are only surfaces, you should add a 
>> surface loop to consider the volume and be able to mesh it.
>>
>> Regards,
>> Ruth
>>
>> Stefano Zinna wrote:
>>> Dear Sirs.
>>>
>>> I have a problem when crossing from surface mesh to volume mesh in 
>>> Gmsh.
>>> I'm using Gmsh 2.2.4 version. It seems that Gmsh is not able to 
>>> recognize volumes in the surface mesh attached (56.stl.tar.gz). Also 
>>> i attach the starting CAD file (TOLOMEO LED.stp.tar.gz) where i took 
>>> a section to create the surface mesh.
>>> Let me know if you can help me. Many thanks
>>>
>>> best regards,
>>> Stefano Zinna
>>> ------------------------------------------------------------------------ 
>>>
>>>
>>> _______________________________________________
>>> gmsh mailing list
>>> gmsh at geuz.org
>>> http://www.geuz.org/mailman/listinfo/gmsh
>>
>> -- 
>> Dr. Ir. Ruth V. Sabariego
>> University of Liege, Institut Montefiore,
>> Dept. of Electrical Engineering & Computer Science, Applied & 
>> Computational Electromagnetics (ACE),
>> Sart Tilman Campus, Grande Traverse, 10 (B28), B-4000 LIEGE, Belgium
>> phone: +32-4-3663737 -- fax: +32-4-3662910 -- 
>> http://elap.montefiore.ulg.ac.be/
>

-- 
Dr. Ir. Ruth V. Sabariego
University of Liege, Institut Montefiore,
Dept. of Electrical Engineering & Computer Science, 
Applied & Computational Electromagnetics (ACE),
Sart Tilman Campus, Grande Traverse, 10 (B28), B-4000 LIEGE, Belgium
phone: +32-4-3663737 -- fax: +32-4-3662910 -- http://elap.montefiore.ulg.ac.be/