[Gmsh] Cut and merge faces

benjamin JEANTY-RUARD ruard at artenum.com
Thu Oct 10 11:01:07 CEST 2013


Hi Matthias,

Thanks a lot for your answer, now I understand this feature.

best regards,

Benjamin

Le mercredi 09 octobre 2013 à 07:10 +0000, Zenker, Dr. Matthias a
écrit :
> Hi Benjamin,
> 
> to apply "cut and merge faces", check the corresponding item (under Tools->Options->Geometry->General) and load your geometry (e.g. in STEP format). Then duplicated faces may be cleaned so that you get a conformal mesh. IF your geometry does not appear at all, try if you can load it with "cut and merge faces" unchecked. If this works, the healing has failed before and you cannot use the feature for this geometry.
> I don't know of any detailed documentation about the "cut and merge faces" functionality.
> 
> HTH,
> 
> Matthias
> 
> > -----Ursprüngliche Nachricht-----
> > Von: benjamin JEANTY-RUARD [mailto:ruard at artenum.com]
> > Gesendet: Mittwoch, 2. Oktober 2013 14:02
> > An: gmsh at geuz.org
> > Betreff: [Gmsh] Cut and merge faces
> >
> > Dear Gmsh team,
> >
> > I would like to use the "cut and merge faces" feature available in
> > tools->Options->Geometry->General but I do not find documentation about
> > it.
> >
> > I read in Gmsh mailing list, it works with plane surfaces and no with ruled
> > surfaces but even with plane surfaces I do not understand how it works and I
> > fail to apply this feature.
> >
> > I would like to know if someone can explain to me how this feature works or
> > help me to find a documentation about it (geo format or STL format, if faces
> > has intersections with others or not, hole in volume or not, ...)
> >
> > Kind regards,
> >
> > Benjamin
> >
> > --
> >
> >
> > Benjamin JEANTY-RUARD
> >
> >   --------------------
> >       Artenum Toulouse - Science & Groupware
> >       http://www.artenum.com
> >
> >           Bâtiment Calfocenter
> >           10, rue Marguerite Long
> >           31320 Castanet-Tolosan
> >           France
> >           Phone: +33 (0)5 82 95 19 00
> >
> >
> >
> >
> 
> 
> 
> _____________________________________________________________________
> ERBE Elektromedizin GmbH
> Firmensitz: 72072 Tuebingen
> Geschaeftsfuehrer: Christian O. Erbe, Reiner Thede
> Registergericht: Stuttgart HRB 380137
> 

-- 


Benjamin JEANTY-RUARD

  --------------------
      Artenum Toulouse - Science & Groupware
      http://www.artenum.com

          Bâtiment Calfocenter
          10, rue Marguerite Long
          31320 Castanet-Tolosan
          France
          Phone: +33 (0)5 82 95 19 00